plough

["S. Lunas" <bookbinder@xxxxxxxx>]

Anyone out there know where would I find a used (or new) plough to fit a
lying press (Hickok).  Will any plough work or does one need to buy one
to fit this press which measures 41.75 inches long, opens to 13 inches
with 26
inches between screws.  Plough guide is 30 inches long and the plough
runner is  1 7/8 inches wide.

Thanks,
Susan Lunas
--
Many Moons Book Conservation
editor: Binders Guild Newsletter
bookbinder@xxxxxxxx

             ***********************************************
             GBW: The listserv for GBW member communications
         To Post, address your message to: gbw@xxxxxxxxxxxxxxxx
         When replying, make sure your message is addressed to:
                          gbw@xxxxxxxxxxxxxxxx
                          To unsubscribe send:
                                UNSUB GBW
                           ALL COMMANDS GO TO:
                        LISTSERV@xxxxxxxxxxxxxxxx
       GBW homepage at <http://palimpsest.stanford.edu/byorg/gbw>
       For problems, contact Peter Verheyen at gbw@xxxxxxxxxxxxxx
             ***********************************************